Join Maine Department of Labor for no-cost March 2024 trainings to fulfill workplace safety and labor law requirements.

Upcoming classes:

 

Confined Space Entry – Construction –

March 1, 2024 I 8:30 a.m. – 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

A confined space has limited or restrictive openings for accessing the space and is not meant for continuous use by workers. OSHA uses the term "permit-required confined space" (permit-space) to describe a confined space in which workers are exposed to serious hazards within a confined space. Employers must be able to determine if a confined space is permit-required. In this half-day course, attendees will learn how to evaluate confined spaces, monitor them during use, and set up rescue procedures.

 

Ladder Safety -

March 4, 2024 I 8:30 a.m. – 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

Ladders are a major source of injuries and fatalities in the workplace. However, falls can be reduced if people use caution when climbing ladders or when working in places where falls are a potential hazard. This half-day course will demonstrate how falls from ladders can be prevented through education which includes planning for their use, ladder inspection, and using basic ladder safeguards.

 

Incident Investigation/Injury Analysis -  

March 5, 2024 I 8:30 a.m. – 3:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

When work doesn't go as planned, incidents and close calls happen. Investigating these incidents can prevent similar or even more serious problems from happening. In this half-day class, learn how to conduct a thorough investigation and how to use your results to prevent future incidents.

 

Life Safety Code 101 –

March 7, 2024 I 8:30 a.m. – 4:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This one-day class will provide a working overview of National Fire Protection Association (NFPA) Standard 101 "Life Safety Code" for fire and life safety in the building environment. Topics covered will include classification of occupancy types, adequate means of egress, occupant load factors, and occupancy specific hazards to fire and life safety. The Life Safety Code is adopted in the State of Maine as the state code for fire and life safety in buildings.

 

Trenching & Excavation -

March 8, 2024 I 8:30 a.m. – 12:30 p.m.  SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This course explains the dangers to employees from trenching and excavation operations, soil classifications, OSHA requirements, and the types of protective systems to prevent cave-ins. You will also learn what is meant by "competent person."

 

Mine Safety & Health Administration: Refresher –

March 11, 2024 I 8:30 a.m. – 5:00 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

The Mine Safety and Health Administration (MSHA) requires all surface mining (i.e., stone crushing, gravel pit, etc.) employees to receive an eight-hour annual training. This one-day course will cover generic MSHA training. However, site-specific training will also need to be conducted once you return to your respective job sites.

 

Emergency Scene Traffic Control – VIRTUAL

March 11, 2024 I 8:30 a.m. – 10:30 a.m.  

Performing duties while working in the roadway is extremely dangerous for emergency responders. This class covers requirements for training, personal protective equipment (PPE) for firefighters and Emergency Medical Service (EMS) providers who will be controlling traffic at unplanned motor vehicle accidents. This program will also include setting up a safe work-zone, equipment needed, guidance for day and nighttime operations, blocking to protect the scene, apparatus parking, incident types, signs, communication regulatory text, liability and much more.

 

Wage & Hour Compliance –

March 13, 2024 I 9:00 a.m. – 12:00 p.m. Northern Maine Community College, 33 Edgemont Drive, Presque Isle

This course is designed for human resource or benefits professionals, accountants, business owners, managers, or payroll supervisors. Labor laws can be complex. This seminar covers wage and hour laws, including minimum wage, overtime, youth employment, severance pay, equal pay, rest breaks, leave requirements (earned paid leave, family medical leave, family sick leave and leave for victims of violence). This class addresses commonly asked labor-related questions.

 

NFPA 1401 Fire Service Training, Reports & Records –

March 13, 2024 I 8:30 a.m. – 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This half-day course provides training to fire fighters and emergency response personnel on the proper approach for conducting safe and efficient, live, fire-training evaluations for both acquired structures and static-burn facilities. Discussion will also include legal ramifications in the event of a negative outcome.

 

Mine Safety & Health Administration: Refresher –

March 14, 2024 I 8:30 a.m. – 5:00 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

The Mine Safety and Health Administration (MSHA) requires all surface mining (i.e., stone crushing, gravel pit, etc.) employees to receive an eight-hour annual training. This one-day course will cover generic MSHA training. However, site-specific training will also need to be conducted once you return to your respective job sites.

 

10 Hour Construction Standards –

March 14 & 15, 2024 I 8:30 a.m. – 4:30 a.m. (Day 1); 8;30 a.m. to 1:00 p.m. (Day 2) University of Maine Presque Isle, 181 Main Street, Presque Isle

This one-and-a-half-day course offers basic information on a variety of construction industry safety/health standards (29 CFR 1926). Attendees who complete the course will receive an OSHA 10-hour course completion certificate.

 

Wage & Hour Compliance –

March 20, 2024 I 9:00 a.m. – 12:00 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This course is designed for human resource or benefits professionals, accountants, business owners, managers, or payroll supervisors. Labor laws can be complex. This seminar covers wage and hour laws, including minimum wage, overtime, youth employment, severance pay, equal pay, rest breaks, leave requirements (earned paid leave, family medical leave, family sick leave and leave for victims of violence). This class addresses commonly asked labor-related questions.

 

Impairment Detection Training for Employers –

March 21, 2024 I 8:30 a.m. – 3:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This one-day training session is designed to help owners, managers, and supervisors recognize and respond appropriately to employee-impairment in the workplace to reduce worker accidents and injuries. Participants will be taught procedures to detect impairment regardless of the substance or cause. This class is designed to fulfill the federal DOT requirements for reasonable suspicion training of supervisors. In addition, participants will learn how to develop and implement policies that address impairment in the workplace and are in compliance with Maine's Substance Use Testing Law.

 

30 Hour Construction Standards –

March 25-29, 2024 I 8:30 a.m. – 4:30 p.m. (every day) SafetyWorks! Training Institute, 45 Commerce Drive, Augusta

This five-day course introduces attendees new to safety and health to the OSHA standards for construction industry (29 CFR 1926). Attendees who complete all five days will receive an OSHA 30-hour construction course certificate.

 

Register and browse more SafetyWorks! classes: https://www.safetyworksmaine.gov/training/scheduled_classes/register.shtml

If you have questions about safety or upcoming classes, reach out to SafetyWorks! at 1-877-SAFE-345 or general.bls-safetyworks@maine.gov.

If you have questions about Wage and Hour compliance, please reach out to the Wage and Hour Division at 207-623-7900 or bls.mdol@maine.gov, or visit www.maine.gov/labor/bls/.  

Upcoming Event: The 14th Annual Aroostook County Safety Symposium will be held April 16-17, 2024 at the University of Maine at Presque Isle.  This includes course offerings on fall protection, electrical safety, recordkeeping, recovery in the workplace, and Safety and the Supervisor and many other classes.  In addition, a free half day session on Managing Underground Safety will be offered for excavation contractors. For a brochure or to register, contact BParks@memic.com.